PLI-SAT-01 Diving Saturation System
|
MAIN PARTICULARS |
| Owner: |
Perisai (L) Inc. |
| Year Built: |
2004 |
| Refurbished by: |
UTS |
| Classification standard: |
IMCA D 024 |
| Depth rating: |
Depth rating: 200 bar (200 m) |
| DIVE AND SATURATION CONTROL UNIT |
| Dive / Bell Control Panels |
| Diver Gas Reclaim Control Panel |
| Bell Services Controls ( Electrics, Communications, Hot Water) Thru Water Communications |
| Carbon Dioxide & Oxygen Analyzers for Bell & Diver Breathing Gas |
| Diver & Bell Internal Video Monitoring & Controls |
| Diver Video Surface Control |
| Chamber Control Panel ( ML 1, TUP, HRC ) |
| Chamber Environment Control Panel |
| Un-Scrambler Communications Sets |
| Carbon Dioxide & Oxygen Analyzers for Chamber Monitoring |
| Closed Circuit Video System to Chambers |
| DIVING BELL 3 MAN |
| 2 x 60 m Diver umbilicals & 1 x Standby Diver Umbilical 1 |
| 2 x Divers Hat Mounted Colour Cameras & Lights |
| 2 x Bell Carbon Dioxide Scrubber |
| 1x Bell Heater ( Hot Water Unit ) |
| 2 x Diver Gas Reclaim ( DGRS) Panel |
| Bell / Diver Communications System |
| Onboard Emergency Gas Cylinders & Power battery |
| Thru Water Communications |
| Fixed Stand-off Frame |
| Hydraulic Bottom Door System |
| Internal & external lights |
| HYPERBARIC RESCUE CHAMBER (HRC) |
| Emergency Gas Cylinders & Power Battery 48 hours |
| 9 x Full Seat Harness & approved Safety Helmets |
| 1 x Toilet, Shower, Wash Basin |
| 3 x HCU, 11 x BIBS, Communications |
| 3 X Bunk Beds |
| Lifting Rigging and Towing Bridle |
| LIFE SUPPORT MACHINERY UNIT |
| Dual Diver Hot Water Unit (100% redundancy) |
| 3 x Chamber Environment Control Units |
| Chamber Potable Water Unit pre-set temperature |
| Air Driven Diver Gas Reclaim Surface Unit |
| Cooling Fans |
| HRC EMERGENCY CONTROL UNIT |
| Control panel |
| Communications & Analyzers |
| Environment Control Cooling |
| Supplied with Emergency Gas in separate racks |
| Supplied with Emergency Hook Up Umbilical |
|
CHAMBER VOLUMES |
| Main DDC & TUP |
22.7 m3 |
| HRC |
13.5 m3 |
| Bell |
4.5 m3 |
|
|
|
|
| MAIN SKID |
| A - Frame & Bell Trolley |
| 6 - Man Living Chamber c/w 6 x Bunk Beds with Mattresses, 7 x BIBS, 2 x HCU, CO2 Scrubber, Medical Lock & Communications Transfer |
| Chamber (TUP) c/w 1 x Toilet, Shower, Wash Basin, 1 x HCU, 3 x BIBS, CO2 Scrubber & Communications. |
| WINCH SKID |
| Main Bell Winch ( Hydraulic 10 tonne Man riding ) |
| Guide Wire Winch ( Hydraulic 6 tonne double sheaved) |
| Bell recovery in water |
| Umbilical Sheave (Air) |
|
|
|
|
|
|
|
| OTHER EQUIPMENT |
| 20’ Store / Workshop Container |
| 260 m Bell Umbilical on powered reel |
| 3 x Ultra flow 500 reclaim hats |
| 2 x KMB 18B Band Mask |
| Deck Electrical / Gas Leads |
| Spreader Bar & Lifting Slings |
| POWER SUPPLY REQUIREMENTS |
| Electrical Power Requirement 440 50 / 60Hz 250kVA |
| Emergency Generator 440 50 / 60Hz 250kVA |
| Compressed Air 400cfm,90 psi |
| Seawater 25 gpm |
| Fresh Water 3 gpm |
Hyperbaric Rescue Chamber
Saturation Control
Dive Control Bell Panel
Inside The HRC
Inside Machinery Van
Inside Main Chamber
